Pallet Racks in Palmetto, FL

We design and install pallet racks in Palmetto for the transload, import and distribution operations orbiting SeaPort Manatee. Port Manatee Commerce Center is a near-dock, multimodal transloading campus of roughly 310,000 to 360,000 square feet just outside the port gates, with CSX rail docks and Foreign Trade Zone #169 bonded warehousing, and the warehouse racking in buildings like these has to match high volume and fast turns.

Port Manatee Logistics Center at 11805 US 41 is a three-building Class A tilt-wall park with units from about 7,500 up to 187,200 square feet and access to US-41, I-75 and I-275. Skyway Industrial Park adds a 34-acre county-owned site less than 3 miles from the port entrance and the I-75 and I-275 interchange. Bulk, break-bulk and container cargo through the port drives the storage demand.

Drive-In and Pushback Rack for Palmetto's Transload Pallets

Transloading means high volume and fast turns. Drive-in rack stores same-SKU import pallets several deep with no aisles between rows, and pushback rack gives similar density with access from a single aisle.

We size the system to your pallets per SKU and your turn rate, because a transload building that picks the wrong density pays for it every day.

Cantilever Rack for Break-Bulk and Building Products

Break-bulk cargo and building products bring long, awkward loads. Cantilever rack holds lumber, pipe, steel and bundled material on open arms, loaded by forklift without front uprights in the way.

We set arm length and spacing to your bundle dimensions and rate every level in writing.

Pallet Racking for Bonded and FTZ Warehousing

Foreign Trade Zone and bonded storage need clean, accountable layouts. Selective pallet racking gives every pallet its own address, which simplifies inventory control and inspection access.

Beam capacities and pallet position counts come in writing, so the pallet racking plan doubles as documentation for how the building is organized.

Pallet Rack Layouts for Smaller Units Near the Port

Not every port-area tenant needs a big building. Port Manatee Logistics Center offers units from about 7,500 square feet, and smaller import and distribution users work out of bays that size all around the port district.

In a smaller unit, the layout decision is usually selective rack with aisles matched to a single forklift, plus cantilever along a wall if you handle long material. We keep the dock approach clear so trucks can load without moving pallets twice.

Tell us your container or truck schedule and we will plan staging so inbound freight has a place to land before it goes into rack.

Measured, Drawn, Then Quoted

We measure the building and record clear height to the lowest obstruction, column positions and door locations before drawing anything.

Pallet dimensions and weights set beam capacity; bundle sizes set cantilever arms. Every rating comes in writing with the quote.

Installs are phased around ship and rail schedules so cargo keeps moving while the rack goes up.

Palmetto Pallet Rack FAQs

Serving Palmetto From Clearwater

Located in Clearwater, we serve the entire Pinellas County area with industrial pallet racks and warehouse storage solutions.